Moscow RUPLASTICA 2027: plastics and rubber trade fair

RUPLASTICA is the international trade fair for plastics and rubber, covering machinery and equipment, raw materials and auxiliary materials, polymer and rubber products, services, recycling solutions and additive manufacturing. The 2027 edition is scheduled for 26–29 January 2027 at VDNKh EXPO, Pavilions 69 and 75, Moscow, Russia. The organiser’s visitor information lists opening hours of 10:00–18:00 from 26 to 28 January and 10:00–16:00 on 29 January.

RUPLASTICA is designed around the polymer lifecycle: from raw materials and processing equipment through tooling and finished products to recycling and disposal. Its adjacent projects connect visitors with moulds and dies, additive manufacturing, recycling and packaging. The event is therefore relevant not only to plastics processors, but also to buyers and technical specialists comparing products, production equipment and supply-chain options.

Why Moscow RUPLASTICA matters to the polymer industry

See several parts of the value chain together

The official product categories span machinery, materials, polymer products and services, with related projects in recycling, additive manufacturing, moulds and dies, and packaging. Visitors can use this breadth to understand how equipment, feedstock, tooling and end products relate to one another, rather than evaluating a single product category in isolation.

Compare technical and commercial options

For processors and manufacturers, a trade-fair setting can make it easier to examine equipment and product examples, ask suppliers about specifications and identify areas that deserve further evaluation. Buyers and distributors can compare product ranges and supplier propositions. These are opportunities to investigate; a visit does not guarantee supplier suitability, commercial terms or a business result.

Follow industry discussion alongside the exhibits

The official visitor information describes an accompanying four-day business programme. It gives attendees a further route to exchange expertise and follow polymer-industry topics. The topics and session details for the 2027 programme should be checked with the organiser as they are published.

Understand the event’s reported scale

For 2026, the organiser reported 1,042 exhibitors from 16 countries and 31,000 visitors. The site marks these figures as shared with the parallel Recycling Solutions and Upakexpo exhibitions. They indicate the scale of the combined show environment in 2026, not a forecast or guarantee for 2027.

Who should visit Moscow RUPLASTICA?

Plastics and rubber processors and manufacturing engineers

Useful if you are assessing production technology, process inputs or ways to address a specific manufacturing requirement. The official categories include machinery and equipment, raw materials and auxiliary materials, polymer and rubber products, and services for the industry.

• Compare machinery against your process, material and throughput requirements.
• Review tooling, moulds and dies alongside the equipment they support.
• Discuss material handling, auxiliary systems and service needs with relevant suppliers.
• Examine polymer and rubber product examples for applications similar to your own.
• Record technical questions and the evidence needed before making a capital or process decision.

Bring non-confidential process specifications, material requirements and a clear description of the production issue you are trying to solve. Treat initial discussions as a way to shortlist options; validate technical claims and operating costs after the fair.

Buyers, procurement teams and distributors

Useful if you source polymer or rubber materials, finished products, machinery or services, or if you are assessing additions to a distribution portfolio. The range of official product categories supports structured comparison across adjacent parts of the supply chain.

• Separate immediate sourcing needs from longer-term market scanning.
• Compare products using consistent criteria such as specification, application, compatibility and service requirements.
• Ask suppliers for catalogues, technical documents, samples or commercial details where appropriate.
• For distribution discussions, clarify target applications, territory, support expectations and follow-up steps.
• Keep a record of items that require later checks, including conformity, availability and delivery terms.

The organiser reported visitors from a broad international audience in its 2026 combined-show figures. This is historical scale information, not a promise that a particular supplier, buyer or distributor will be present in 2027.

Polymer material, machinery and product suppliers

Useful for manufacturers, technology providers and service companies seeking to present products across plastics and rubber processing. The event’s published categories include machinery, raw and auxiliary materials, polymer and rubber products, and industry services.

• Identify the product application and buyer problem your exhibit addresses.
• Prepare concise technical information that lets visitors compare performance and suitability.
• Bring examples or documentation that distinguish product variants, materials or operating conditions.
• Plan conversations around a visitor’s process, specification and next decision rather than a general product pitch.
• Record follow-up requests precisely and share only information that is ready for technical or commercial review.

Exhibitors should confirm current participation requirements, stand arrangements and deadlines directly with the organiser. This guide does not assume availability, pricing or terms.

Recycling and additive-manufacturing professionals

Useful if your work involves secondary polymers, recycling solutions, circular material streams, 3D printing or related manufacturing applications. These subjects appear among RUPLASTICA’s linked projects and published exhibition themes.

• Compare relevant material, process and equipment options against your feedstock or application needs.
• Ask how a solution handles material variability, product requirements and process integration.
• For additive manufacturing, define the materials and production use cases you need to assess.
• For recycling, distinguish collection, sorting, processing and end-use questions rather than treating recycling as one technology.
• Note what requires testing or independent verification before a sourcing or investment decision.

The event’s linked projects provide a reason to explore how these areas connect with the wider polymer chain; the precise 2027 exhibitor mix should be confirmed in the current catalogue.

What can you find at Moscow RUPLASTICA?

Machinery and equipment

The official category covers machinery and equipment for plastics and rubber industry applications. Technical visitors can use the exhibition to identify relevant equipment suppliers and compare the questions they need answered, including process fit, material compatibility, operating requirements, support and integration. Confirm specific models and features directly with exhibitors.

Raw materials and auxiliary materials

This category is relevant to material buyers, processors and product manufacturers evaluating polymers, rubber inputs and supporting materials. Clarify grade, specification, intended application, consistency and documentation needs when comparing products. Do not rely on a display sample alone to establish suitability for production.

Products made of polymer materials and rubbers

Finished products and components can help visitors assess applications, construction and supplier ranges. Buyers may want to record the intended use, required performance and any material or quality constraints before comparing alternatives.

Services for the plastics and rubber industry

Industry services are included among the official exhibition themes. Visitors can define the service need, the process stage it affects and the information required to evaluate a provider, then use conversations at the show to identify which options merit a more detailed review.

Recycling solutions

Recycling Solutions is one of the linked projects named by the organiser. Professionals can explore relevant recycling equipment, materials or services where present, while checking the specific application, feedstock assumptions and output requirements with each supplier.

Additive manufacturing, moulds and dies, and packaging

The event site identifies additive manufacturing and moulds and dies among the connected show themes, alongside packaging through Upakexpo. These adjacent areas may be useful to visitors looking beyond a single processing step. Check the current exhibitor catalogue and programme for the exact 2027 participants and content.

What makes Moscow RUPLASTICA distinctive?

The event’s published scope follows a connected polymer lifecycle rather than one isolated product group. The organiser describes a combination of plastics and rubber machinery, materials, finished products and services with related projects for moulds and dies, additive manufacturing, recycling and packaging. That combination gives technical and commercial visitors a reason to compare technologies across stages of production and recovery.

The show’s 2026 headline figures—1,042 exhibitors, 16 countries and 31,000 visitors—are reported jointly with Recycling Solutions and Upakexpo. They are useful context for the combined event environment, but should not be treated as RUPLASTICA-only counts or as promised 2027 attendance.

Set useful objectives before visiting

If you work in processing or production engineering

Set an objective such as: shortlist equipment or tooling options that could address one defined production requirement. Write down the process, material, operating conditions and questions you need answered. Use the fair to identify potential solutions, then arrange the tests and technical checks needed before a decision.

If you buy materials or finished products

Set an objective such as: compare a defined group of suppliers against a consistent specification and application. Decide which product characteristics matter most, what documents you need, and which alternatives are acceptable. Capture differences in a comparable format rather than relying on memory after multiple conversations.

If you distribute products or represent a supplier

Set an objective such as: identify product categories and supplier discussions that fit a named customer segment. Prepare the territory, application and support questions relevant to your business. Separate immediate commercial follow-up from exploratory conversations.

If you work in recycling or additive manufacturing

Set an objective such as: identify which material or process questions can be advanced by a supplier conversation, and which require later trials. Define your feedstock, material or output requirements before comparing equipment and services.

How to prepare before Moscow RUPLASTICA

1. Define the decision you want to make

Choose one primary objective and a small number of secondary questions. Examples include finding an equipment shortlist, comparing raw-material options, reviewing finished-product suppliers, or mapping recycling and additive-manufacturing solutions relevant to your work. A specific objective helps you decide which stands and programme items deserve time.

2. Check current visitor information

The organiser’s visitor page gives the date, venue, opening hours and visitor resources. Recheck those details before travelling, and consult the official event site for any updates to access, registration, programme information and the exhibitor catalogue. Ticket availability and terms can change; do not assume a previous year’s arrangements remain in force.

3. Build a priority list

When the current catalogue is available, group exhibitors into three tiers: A – essential for a current project or sourcing need; B – useful for alternatives, complementary products or future planning; and C – explore if time allows for broader market learning. Record the product category and the question you want answered for each priority.

4. Prepare technical questions

Tailor questions to the products you expect to compare. For machinery, ask about process fit, materials, operating conditions, integration and after-sales support. For raw materials, ask about grade, consistency, application and technical documentation. For moulds and dies, clarify the relevant tooling requirements. For recycling, ask about feedstock and output assumptions. For additive manufacturing, define the material and production use case. Ask for supporting documentation rather than relying on broad claims.

5. Prepare a comparison record

Use a simple note for each conversation: Company → product or service → application → relevant specification → evidence requested → next action. Add a separate note for questions that cannot be settled at the stand, such as compatibility trials, sample testing or commercial terms.

6. Coordinate your team

If colleagues are attending, agree who will cover machinery, materials, product sourcing, recycling and programme sessions. Share a common format for recording leads and technical questions. This reduces duplicated conversations and makes post-show comparisons easier.

How to make the most of the exhibition

Start with the areas most closely connected to your objective. For a production project, compare equipment and tooling before broadening to materials and services. For sourcing, review the relevant materials or finished-product categories and capture supplier details in a consistent form. For recycling or additive manufacturing, use the linked themes to identify technologies worth further evaluation, not to assume that every solution will fit your process.

During each discussion, distinguish what you observed from what the exhibitor stated and what remains to be verified. Ask for the specification or document that would allow you to check a claim after the event. Note any dependencies: material grade, machine configuration, tooling, feedstock quality, operating conditions or local service requirements.

The organiser’s visitor page presents an exhibitor list, hall plan, e-ticket and programme resources. Consult the current versions before the fair and use them to plan a route. If a tool or catalogue is not yet available, do not substitute an old edition’s list for the current one.

Plan your time realistically

The official visitor information lists four opening days. It gives hours of 10:00–18:00 on 26–28 January and 10:00–16:00 on 29 January. Use those published hours as a planning frame and recheck the organiser’s information closer to the event.

Before the first day

Confirm your visitor arrangements, identify priority categories and mark essential exhibitor conversations from the current catalogue when available. Reserve time for the business programme if its published topics relate to your objectives.

During each day

Keep a practical balance between planned meetings, category exploration and time to record information. Leave room to return to a stand after comparing alternatives. Avoid scheduling every minute; technical conversations may require more time than a quick product introduction.

On the final day

Use the shorter published opening hours to revisit high-priority suppliers, clarify outstanding questions and collect promised documentation. Before leaving, organise notes into immediate follow-up, technical evaluation and longer-term market intelligence.

Who should consider exhibiting?

RUPLASTICA’s published categories are relevant to suppliers of plastics and rubber machinery, raw and auxiliary materials, polymer and rubber products, industry services, recycling solutions, additive manufacturing, moulds and dies, and packaging. Companies considering participation should check the organiser’s current exhibitor information for availability, stand options, terms and deadlines.

Before exhibiting, define the result you want to pursue: present a specific technology, introduce a product range, meet relevant distributors, gather application feedback or identify partners for follow-up. Prepare the technical information visitors will need, and make sure staff can distinguish product claims from independently verified performance data. The 2026 combined-show scale is historical context only; it is not a forecast of the number or profile of visitors to a particular stand in 2027.

Moscow RUPLASTICA visitor checklist

Before

• ☐ Confirm dates, opening hours, venue, registration and current access details with the organiser.
• ☐ Write down the production, sourcing or market question you want to address.
• ☐ Review the current exhibitor catalogue and programme when available.
• ☐ Prioritise suppliers and categories, and prepare product-specific questions.
• ☐ Bring non-confidential specifications and a comparison template suited to your objective.

During

• ☐ Record company, product, application, evidence requested and next action for each important conversation.
• ☐ Compare alternatives using the same criteria.
• ☐ Separate exhibitor statements from documents or tests still required.
• ☐ Keep time for relevant business-programme items and follow-up conversations.

After

• ☐ Group contacts into immediate, technical-evaluation and future-market follow-up.
• ☐ Request outstanding specifications, samples or commercial information.
• ☐ Check compatibility, conformity, service and delivery requirements before purchase decisions.
• ☐ Share findings with colleagues and agree who owns each next step.

After Moscow RUPLASTICA: turn notes into decisions

Within a few days, organise your records while the conversations are still clear. Classify contacts as A – immediate follow-up for an active requirement, B – potential for a future project or alternative supplier, and C – market intelligence for trends or options to revisit later.

For machinery and tooling, follow up with the process conditions, configuration questions and technical documents needed for evaluation. For materials and products, request relevant specifications, samples or quality documentation where appropriate. For recycling and additive-manufacturing solutions, record feedstock, material and output assumptions and identify any trials needed. For services or distribution discussions, confirm scope, territory and responsibilities in writing.

Compare suppliers against the same criteria and include the work still required to validate each option. A productive event visit is not simply a large collection of contacts; it is a set of better-informed decisions and clearly assigned next steps.

Is Moscow RUPLASTICA worth visiting?

The event is most relevant to professionals working with plastics and rubber processing, machinery, materials, finished products, industry services, recycling, tooling, additive manufacturing and packaging. Its published scope links several stages of the polymer lifecycle, while the accompanying business programme offers an additional way to engage with industry topics.

Visitors are likely to gain more from the fair if they arrive with a defined technical or sourcing objective, compare alternatives consistently and follow up on evidence still needed. A broad exhibition can support discovery, but it cannot replace product testing, specification review or commercial due diligence.

Moscow RUPLASTICA 2027 at a glance

Dates, venue and opening hours are listed in the organiser’s visitor information. The 2026 scale figures relate to the combined shows and do not forecast 2027 participation.

Make your visit purposeful

Before attending Moscow RUPLASTICA, decide which equipment, materials, products or industry connections matter most to your work. Use the fair to discover and compare options, keep a clear record of what is verified and what still needs checking, and leave time for follow-up. Explore. Compare. Evaluate. Follow through.