ALUMINIUM Düsseldorf 2028

ALUMINIUM Düsseldorf takes place from 26–28 September 2028 at Messe Düsseldorf, Düsseldorf, Germany. It is the international trade fair for the aluminium value chain, spanning primary production, semi-finished products, foundry and casting, processing plant, surface technology, software and automation, and recycling. Its business value lies in comparing connected parts of the chain in one professional setting: materials, equipment, manufacturing systems and circularity solutions can be assessed against the same production or sourcing priorities.

ALUMINIUM Düsseldorf at a glance

The organiser has announced the 2028 dates and venue. Figures and programme examples below describe the 2026 edition, not a forecast for 2028.

Why ALUMINIUM Düsseldorf matters

See the value chain together

Aluminium decisions connect metal supply, alloy and product choices, forming, finishing, equipment, quality control and end-of-life recovery. A broad trade fair gives professionals a way to compare those links in one visit. Buyers can consider how a material or machine fits the full production requirement; producers can look across technologies that may affect yield, product quality, energy use or recycling routes.

Compare industrial solutions

Technical discussions are more useful when they begin with a defined application. Visitors can compare process capability, throughput, dimensions, tolerances, surface requirements, integration needs, maintenance and service arrangements. Treat demonstrations and product information as starting points for technical due diligence, then request specifications and references needed for a purchase decision.

Follow manufacturing and circularity questions

The 2026 programme included discussion of sustainability, recycling, circular economy, supply-chain transparency and CBAM. Its Sustainability & Recycling Area was described as a place to compare decarbonisation and circularity solutions. These past-edition examples are not a promise that the 2028 programme will repeat them.

• 21,115 trade visitors from 105 countries, reported for 2026.
• More than 800 exhibitors and partners from 55 countries, reported for 2026.
• 80,000 m² of exhibition space, reported for 2026.

This scale signals an international professional audience and a wide range of technical conversations; it does not guarantee a particular supplier, buyer or business outcome.

Exhibition sectors and product groups at ALUMINIUM Düsseldorf

Primary aluminium and remelted metal

Primary and remelted products form the starting point for downstream specifications. Categories include:

• Primary aluminium and smelter products
• Remelted products and secondary metal
• Aluminium ingots and alloyed metal
• Raw materials and production inputs
• Metal for casting and downstream processing

Semi-finished products and components

Product form affects design, conversion, performance and supply planning:

• Rolled sheet, strip and coil
• Extruded profiles and other extruded products
• Rod, bar, tube and wire
• Forged and die-forged components
• Shaped and perforated sheet components

Foundry, casting and magnesium

Foundry professionals can explore equipment, materials and cast products for different component and alloy requirements:

• Pressure die-casting
• Sand casting and mould casting
• Magnesium and magnesium-alloy castings
• Foundry technology and production equipment
• Cast components for transport, construction and industry

Plant engineering and processing machinery

The 2026 report described plant engineering and processing technologies, including extrusion, profile cutting and machining examples:

• Smelting and primary-production plant
• Extrusion presses and extrusion lines
• Rolling, casting and remelting equipment
• Saws, cut-to-length systems and machining centres
• Mechanical handling, measurement and testing equipment

Surface treatment and finishing

Finishing affects appearance, corrosion performance, downstream processing and customer acceptance:

• Surface-treatment plant and process equipment
• Pretreatment systems and consumables
• Polishing and mechanical finishing
• Anodising and electroplating
• Coating and corrosion protection

Recycling, circularity and resource recovery

The 2026 report described a Sustainability & Recycling Area and examples of scrap sorting and post-consumer scrap processing:

• Aluminium scrap sorting and preparation
• Recovery, reclamation and recycling equipment
• Remelting and secondary-metal production systems
• Process solutions for post-consumer scrap
• Decarbonisation and circularity technologies

Software, automation and connected manufacturing

Digital systems can affect control, traceability and coordination across equipment and plants:

• Process simulation and industrial software
• Automation and process control
• Connectivity and production data systems
• Digital product information and traceability solutions
• Engineering and technical services

Who should visit ALUMINIUM Düsseldorf?

Aluminium producers, smelters and remelters

Useful if your company is reviewing metal production, process efficiency, equipment or secondary-metal routes. Prioritise:

• Primary and remelted metal technologies
• Casthouse equipment and process control
• Scrap sorting, recovery and recycling systems
• Energy, material and quality implications of process choices
• Technical data and service requirements for existing assets

Frame a specific production issue and identify which technologies warrant later engineering review.

Processors, rolling mills, extruders and component manufacturers

Useful if you buy metal, convert it into products or are considering equipment and process changes. Focus on:

• Alloy, temper, form and dimensional requirements
• Rolling, extrusion, casting and machining capability
• Surface finish, tolerances and downstream compatibility
• Scrap recovery and material-loop options
• Automation, throughput, maintenance and integration

Bring representative non-confidential specifications so supplier discussions can move beyond general capability claims.

Buyers, procurement teams, importers and distributors

Useful if you need to identify or compare metal, components, equipment or process suppliers. Prioritise:

• Supplier product range and target applications
• Minimum order, capacity, lead time and delivery terms
• Quality systems, certifications and available documentation
• Local service, spare parts and technical support
• Evidence for recycled content, emissions data or traceability where relevant

Build a shortlist in advance and separate immediate sourcing needs from suppliers to monitor for future projects.

Equipment, software and technology suppliers considering exhibition

Useful if you supply machinery, surface technology, automation, software, testing or recycling solutions. Assess whether the fair’s cross-value-chain audience fits your target market; plan a stand around an application, technical proof points and target customer roles. Review current participation information before committing.

Engineers, technical managers and sustainability professionals

Useful if you evaluate process performance, material selection, plant upgrades, recycling or product traceability. Compare solutions against measurable requirements and record evidence needed for internal review.

Relevant roles: plant and production managers, process and materials engineers, foundry managers, procurement and category managers, quality specialists, maintenance leaders, automation engineers, recycling managers, sustainability professionals, importers and business development teams.

Why visit ALUMINIUM Düsseldorf?

1. Shortlist material suppliers: compare primary, remelted and semi-finished products against alloy, form, dimensions, quality documentation and supply needs.
2. Evaluate production equipment: investigate extrusion, casting, rolling, machining, surface-treatment and handling systems against throughput and integration requirements.
3. Compare finishing approaches: discuss anodising, coating, polishing and other surface processes in relation to product use and quality expectations.
4. Assess recycling options: identify sorting, scrap-processing and remelting technologies for a defined recovery challenge.
5. Explore automation and data: compare software, process control and connected manufacturing for a plant or traceability requirement.
6. Understand industry discussion: use the 2026 conference programme as context, then check the organiser’s current programme for 2028.
7. Plan next steps: record supplier capabilities, documentation gaps and follow-up actions.

Why exhibit at ALUMINIUM Düsseldorf?

Exhibiting may suit producers and suppliers whose products serve aluminium manufacturing, processing, finishing, recycling or connected production. The broad value-chain scope may support conversations with professionals at different stages, but each company should test fit against its target roles and segment.

Define the customers and applications the stand needs to serve. A metal producer may prioritise alloy, form, consistency and supply; an equipment supplier may demonstrate capability, integration and service; a recycling provider may focus on feedstock, sorting quality and recovery performance. Prepare concise technical evidence rather than an undifferentiated catalogue.

• Choose a clear product or application story for each target visitor group.
• Prepare specifications, performance data and relevant quality documentation.
• Plan how the stand team will qualify enquiries and record next actions.
• Assess stand location, demonstrations, staffing and follow-up capacity with the organiser.
• Set a realistic plan for target meetings and post-show evaluation.

Market-entry note: companies placing covered goods on the EU market should assess their role and current CBAM obligations with qualified compliance support. Requirements depend on the goods and operator role; a trade fair or enquiry does not establish compliance or sales demand.

What makes ALUMINIUM Düsseldorf distinctive?

Its documented scope connects primary metal and semi-finished products with machinery, surface treatment, software and recycling. The 2026 edition used thematic areas for foundry technology, primary production, surface treatment and magnesium, alongside a Sustainability & Recycling Area. This breadth can help visitors compare upstream materials, production technologies and downstream resource recovery.

The 2026 programme included the ALUMINIUM Conference and a Sustainability & Recycling Conference. Reported discussions covered circularity, supply-chain transparency, CBAM and sustainable production. The 2026 edition also introduced the ALUMINIUM Innovation Awards, with categories for sustainable and low-carbon manufacturing, technology and product innovation, and smart manufacturing, automation and connectivity. These are previous-edition examples; check the 2028 programme for what will return.

What should you try to achieve at ALUMINIUM Düsseldorf?

Replace “see what is new” with an objective that can guide your route and follow-up.

If you are a buyer or distributor

Identify suppliers that meet a defined alloy, product-form, quality, capacity and delivery requirement. Record the evidence each supplier can provide and the questions that remain.

If you are a producer or processor

Compare equipment or process options against a current plant constraint. Capture performance, integration, maintenance and service questions for technical review.

If you are an engineer or sustainability professional

Find technologies and documentation relevant to one material-efficiency, recycling, traceability or emissions challenge. Separate verified information from claims requiring validation.

If you are exhibiting

Set target conversations by customer type and application, then agree a specific next step for each qualified discussion. A useful outcome is a clear record of requirements and follow-up, not simply a large contact count.

How to prepare before ALUMINIUM Düsseldorf

1. Define the technical or commercial question

Write down the decision you want to improve: metal sourcing, a component specification, a process bottleneck, a new line, surface quality, scrap recovery, automation or traceability. Note the material form, application, operating conditions and constraints a supplier needs to understand.

2. Build a target-company list

Use the organiser’s exhibitor and product information when it is available for 2028. Sort companies into:

• A — Must meet: directly relevant to a defined sourcing need, project or plant issue.
• B — Useful to meet: suppliers or technology providers that may address an adjacent requirement.
• C — Explore if time allows: relevant new segments, market alternatives or technical approaches.

The official visitor-preparation service advises attendees to review exhibitor and product information before arrival. Check current-edition listings rather than assuming 2026 information will carry over.

3. Prepare supplier questions

• Which alloy, temper, dimensions, tolerances and product forms can you supply?
• What capacity, minimum order and lead-time parameters apply?
• Which quality certifications, test results and material declarations can you provide?
• How does equipment integrate with existing lines, controls and utilities?
• What operating, maintenance and service requirements belong in total-cost evaluation?
• Which spare parts and technical support arrangements are available?
• For surface treatment, which finish, pretreatment and corrosion-performance data can be documented?
• For recycling systems, what feedstock assumptions, sorting performance and output-quality measures apply?
• What information can support recycled-content, product-traceability or embedded-emissions assessment?
• Which assumptions need testing at your own production site before a purchase decision?

4. Prioritise meetings and time

Request meetings with the A-list first, then allow time for adjacent suppliers and relevant technical areas. For an investment, bring non-confidential process parameters and identify which engineering, procurement, operations and sustainability colleagues should contribute.

5. Plan participation logistics

The published event page lists visitor hours of 09:00–18:00. Recheck the organiser’s information closer to September 2028 for schedule, entrance or registration changes. ilikevents can help visitors plan a focused exhibition visit; exhibitors can explore participation planning and organiser coordination.

How to make the most of the exhibition

For each worthwhile conversation, record:

1. Company and product: what was presented and for which aluminium application.
2. Relevance: which specification, process issue or goal it may address.
3. Evidence: technical data, quality documents, references or demonstrations still to review.
4. Terms to clarify: capacity, lead time, minimum order, delivery, service and support.
5. Next action: request specifications, compare a quotation, arrange engineering review or close the enquiry.

The organiser’s visitor-preparation guidance describes exhibitor and product directories and programme information as planning tools. The 2026 visitor page also described Colleqt QR codes at exhibitor stands for collecting company information. Confirm digital tools for 2028 before relying on them; keep your own notes as a backup.

Beyond the exhibition floor

ALUMINIUM 2026 included an ALUMINIUM Conference and a Sustainability & Recycling Conference. Topics included circular economy, supply-chain transparency, CBAM and sustainable production. The organiser also described discussion of European automotive competitiveness, data-driven decision-making and industrial transformation. These past sessions can guide what to look for in a future programme, but do not confirm 2028 speakers or sessions.

The 2026 edition featured the Women with Metal Awards and introduced the ALUMINIUM Innovation Awards. The latter covered sustainable and low-carbon manufacturing, technology and product innovation, and smart manufacturing, automation and connectivity. Review the organiser’s next-edition programme and award announcements before setting a session plan.

Networking at ALUMINIUM Düsseldorf

Prepare a short introduction covering your company’s role in the aluminium value chain, the products or applications you handle and the question you are trying to solve. For suppliers, clarify whether you are sourcing, qualifying technology or seeking distribution. For prospective customers, explain the application and evidence needed to evaluate fit.

Close by agreeing a useful next step: technical data exchange, quotation, sample review, engineering meeting or a discussion with decision-makers. Record the action and owner while the conversation is fresh. ilikevents can assist with business-meeting coordination where it fits your participation plan.

ALUMINIUM Düsseldorf visitor profile and business opportunities

Use these groupings to shape a visit, not as a claim that every role or supplier will attend every edition.

Travelling to ALUMINIUM Düsseldorf

The official venue page identifies Messe Düsseldorf at Stockumer Kirchstraße 61, 40474 Düsseldorf, and lists Hall 6 and South entrances. Verify current entrance and access arrangements before 2028 travel.

• Public transport: U78 and U79 connect Düsseldorf city and Central Station with the venue; stops include MERKUR SPIEL-ARENA/Messe Nord and Messe Ost/Stockumer Kirchstraße. U81 and U80 connect from Düsseldorf Airport; bus 722 serves several stops.
• By car: the A44 passes the centre. Use Junction 29, “Messe/Arena”, and car parks P1 and P2; the venue states that a free shuttle serves the entrances.
• By air: Düsseldorf Airport (DUS) is stated as 3 km from the exhibition centre.
• By train: the venue page describes discounted Deutsche Bahn event offers and onward travel; confirm whether an offer is available for 2028.

Practical information for international visitors

Arrange travel, accommodation, registration and any required entry documents early, checking current requirements for your circumstances. ilikevents can help with visit planning, travel arrangements and registration assistance.

One day or several days at ALUMINIUM Düsseldorf?

The event runs for three published days. A focused single-day visit may suit a buyer with a short supplier shortlist and pre-booked conversations. A second day may help when your remit spans equipment, materials and finishing or colleagues need separate discussions. Consider all three days when comparing several production stages, following relevant sessions or exhibiting. The right duration depends on your target companies, meeting schedule and technical decisions.

After ALUMINIUM Düsseldorf: where the value starts

Within a few days, sort contacts into three groups:

• A — Immediate: suppliers tied to a current need; request agreed specifications, documentation, quotation or technical meeting.
• B — Potential: relevant alternatives requiring comparison, qualification or internal review.
• C — Market intelligence: useful information on processes, products, policy or competitors for later decisions.

For equipment, confirm capacity, integration, installation assumptions, service, spares and operating needs. For metal or components, compare alloy, form, quality evidence, capacity, lead time and terms. For recycling and sustainability solutions, request process boundaries, input assumptions and data behind performance claims. Assign an owner and next step to each priority contact.

ALUMINIUM Düsseldorf visitor checklist

Before

• ☐ Set a sourcing, engineering or market-evaluation objective.
• ☐ Review 2028 exhibitor, product and programme information when available.
• ☐ Rank target suppliers and request priority meetings.
• ☐ Prepare material, process, quality and service questions.
• ☐ Confirm registration, access, hours and travel arrangements.

During

• ☐ Compare products against the same technical criteria.
• ☐ Record product details, promised documentation and next actions.
• ☐ Separate confirmed specifications from claims requiring validation.
• ☐ Leave time for relevant adjacent technologies and programme sessions.

After

• ☐ Follow up with priority suppliers while context is fresh.
• ☐ Share comparable technical and commercial information with decision-makers.
• ☐ Verify compliance, quality, capacity and service before committing.
• ☐ Schedule each contact’s next action and owner.

Is ALUMINIUM Düsseldorf worth visiting?

ALUMINIUM Düsseldorf is most relevant to professionals who work with aluminium materials, products, production equipment, casting, finishing, software, automation or recycling. Its broad value-chain coverage and reported international scale make it a strong candidate for a planned supplier, process or market review. Value depends on matching the event’s sectors to a real business or technical question, prioritising conversations and following up with evidence. Without a shortlist or decision framework, the range of products can be difficult to navigate.

Make your visit count

Ask: Which aluminium sourcing, engineering or market decision do I want to improve through the conversations I can have here? Discover. Compare. Evaluate. Decide. Follow up.

Aluminium opportunities in Germany

Market access and current rules

The European Commission states that the definitive Carbon Border Adjustment Mechanism (CBAM) regime applies from 1 January 2026. Aluminium is among the covered sectors. Importers of covered goods, or their indirect customs representatives, are directed to follow the authorisation process for authorised CBAM declarant status. This is an EU market-access rule relevant to companies importing covered aluminium goods into Germany and the wider EU; obligations depend on the goods and operator role.

What companies can assess

For exporters and suppliers, it is prudent to clarify which product and emissions information customers may need for import and reporting processes. The 2026 event’s documented focus on supply-chain transparency, recycling and sustainable production provides relevant subjects for technical discussion, but does not establish demand for a particular product. Visitors can compare recycling and lower-carbon production approaches and ask what data supports each claim. Confirm individual compliance positions with qualified advisers and current official guidance.

Explore Event Opportunities

Use ALUMINIUM Düsseldorf to identify suppliers, technologies and industry conversations that fit your goals. ilikevents can help you plan a focused visit or explore an appropriate exhibition participation plan.

Get Expert Assistance from ilikevents to plan your visit or exhibition participation.

See the ilikevents services for this event